LPSTK-CC1352R: SimpleLink Starter Android/iOS app source code

Hello Jan,

Thanks for the link. However, I noticed that the release date and the last changes made to the source codes is 5 years ago.
Is this the latest version that also supports CC1352R BLE beacons and over-the-air firmware updates for these devices?

This is unclear to me because CC1352R was not even released then unless I am missing something here. I know the BLE beacons should be compatible but what about the OTA feature?

Thanks

Hi Rajeev,

Thank you for the prompt response. Can you verify if you are able to find what you need in the following directory?

https://git.ti.com/cgit/

Regards,

Jan

Jan,

I see these two repos, one for android and the other for iOS:
https://git.ti.com/cgit/simplelink-ble-oad-android/simplelink-ble-oad-android/
https://git.ti.com/cgit/simplelink-ble-oad-ios/simplelink-ble-oad-ios/

However, I am not sure at first glance if these are the same app source files that are on the app stores.

Thanks

Hi Rajeev,

I looked into this more closely and you are right. The source files present in that directory are older. However, we no longer release the source code for the latest app releases. You should be able to use the provided source code as a good starting point and be able to add any missing functionality as it is needed.

Regards,

Jan

Hi Jan,

Thanks for the updates on this. The source code for the newer release would have been fantastic but maybe its TI's IP related.
Anyways, will try to work with the old and improve on that.

Thanks

Hi Rajeev,

No problem! I am going to close this thread for now. If you have any questions directly related to the original query please feel free to reply to this post and it will re-open the thread.

Regards,

Jan