Programming cable for CC2531 Dongle

S Fighter

Intellectual 540 points

Other Parts Discussed in Thread: CC2531, CC-DEBUGGER

Hello,

I am afraid I broke my programming cable provided to program the CC2531 Dongle using SmartRF05.

Where would I be able to get one? Please help me out.

Thanks!
SF

over 14 years ago

0 Jim Noxon over 14 years ago

TI__Genius 14940 points

This should work for you

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=H3CCS-1006G-ND

Jim Noxon

0 S Fighter over 14 years ago in reply to Jim Noxon

Intellectual 540 points

That was not what I was looking for, but I got the idea. Didn't know what they were called. Here is cable I wanted:

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=SAM8217-ND

However, this cable attached to a pitch converting board: from 2.54" to 1.27". Any idea where I can get those? Let me know.

Thanks!
SF

0 Jim Noxon over 14 years ago in reply to S Fighter

TI__Genius 14940 points

So you need the interposer card to translate the 100mil pitch to the 50mil pitch?

Jim Noxon

0 S Fighter over 14 years ago in reply to Jim Noxon

Intellectual 540 points

Yes!

0 Jim Noxon over 14 years ago in reply to S Fighter

TI__Genius 14940 points

I'm sure this isn't the answer you want to hear but the cheapest thing I can offer is to get a CC Debugger which will come with another interposer card. Here is the link

http://focus.ti.com/docs/toolsw/folders/print/cc-debugger.html

The only other option I can think of is to get a PCB kit from a local electronics store and build one but the cost of the kit and your time will probably out cost buying another CC Debugger.

Jim Noxon