LPSTK-CC1352R: How can I display temperature, humidity and lighting on the Web page at the same time.

Chong Yu

Intellectual 1435 points

Part Number: LPSTK-CC1352R
Other Parts Discussed in Thread: CC1352R

Hi, my customer need assistance in the question below.

Hello

I follow this website

dev.ti.com/.../node

I'm going to do that. I'm going to go to the final step. I successfully implemented the temperature upload Web. As is shown in:

Then, I follow the website

https://dev.ti.com/tirex/explore/node?node=AHs0wbxuPRpRbJcHasQeYw__pTTHBmu__LATEST

How can I display temperature, humidity and lighting on the Web page at the same time.

The url is 192.168.7.2:1310

I use BBAI development board for operation, not BBB development board. The version of the SimpleLink Linux GW SDK I am using is ti154stack_linux_x64_4_40_00_03 and the version of SimpleLink CC1352R SDK is SimpleLink CC13x2 26x2 SDK 5.10.0.48

thank you

over 4 years ago

0 Siri over 4 years ago

TI__Guru* 86971 points

Someone will be assigned to this case. In the meantime, please make sure that the links you have in your post is valid.

0 Marie H over 4 years ago

TI__Guru* 82811 points

Hi Chong,

Did you see the SLA on "Using TI 15.4-Stack and portable app to create a remote sensor"? Task 3 outlines how to read a temperature sensor and send the data over the network.

https://dev.ti.com/tirex/explore/node?node=AE-aWIKgOt9jZnKqcfqBWw__pTTHBmu__LATEST

0 Chong Yu over 4 years ago in reply to Marie H

TI__Intellectual 1435 points

Hi Marie,

I have successfully implemented the display of temperature, humidity, brightness and other sensor data on Teraterm. What I want is to transmit these data to BBAI via the development board, and then BBAI to the web page (192.168.7.2:1310), so that the web page can display temperature, humidity, brightness and other data at the same time. Now the web page can only display temperature. How should I modify it?

0 Marie H over 4 years ago in reply to Chong Yu

TI__Guru* 82811 points

Hi,

I see.

The webserver is made with Node.js. If you google this you can find a lot of documentation and examples.

Other wireless

Other wireless technologies forum

LPSTK-CC1352R: How can I display temperature, humidity and lighting on the Web page at the same time.