Hi Team,
I am using TRF7970ARHBT in one of my projects.
I need a peer to peer communication.
Does TI have any reference designs for the same?.
I want an antenna which is flexible type. What are the design critierias for the antenna?.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
I am using TRF7970ARHBT in one of my projects.
I need a peer to peer communication.
Does TI have any reference designs for the same?.
I want an antenna which is flexible type. What are the design critierias for the antenna?.
Hello Shibin,
Please see the application note - NFC active and passive peer to peer communication www.ti.com/lit/an/sloa192b/sloa192b.pdf which is also available in the technical documents section for the TRF7970A..
NFCLink Standalone Firmware Stack (preconfigured for peer to peer mode) is available under following link http://www.ti.com/lit/zip/sloa192
Antenna design guide for the TRF7970A is available in the technical documents section / under following link www.ti.com/lit/an/sloa241c/sloa241c.pdf
Best regards,
Uli
Hi UD,
Thank you for your quick reply.
I found a reference design for TRF7970ARHBT in the below link.
https://www.ti.com/lit/df/tidr502/tidr502.pdf?ts=1629349307077&ref_url=https%253A%252F%252Fwww.ti.com%252Ftool%252FTIDM-NFC-P2P
Will this circuit work fine for my peer-to-peer communication application?.
Yes, this reference design for the TRF7970A can be used for peer to peer, reader writer and card emulation mode.
Best regards,
Uli