• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 15 subscribers
  • Views 92 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Current measuring on CC2500

Adir Vaits
Prodigy 30 points
Other Parts Discussed in Thread: CC2500, CC2510

hello

 

I'm trying to measure current on CC2500 in wor mode (I'm using cc2500EM and smartRF04EB).

Register values I ​took from the application note AN047.

MCSM0=0x18.

WORCTRL0x38.

MCSM2=0x00.

WOREVT1=0x28.

WORENT0=0xA0.

 

Using SmartRF Studio software I tried for put  CC2510 into wor mode by clicking on SWOR (RF device command tab).

And i found that cc2500 entering to wor mode for a half sec and after that entering back to IDLE mode.

 

 

I'd be happy if someone could help me.