CC2651R3SIPA: over the air upgrade of cc2651rsipa in bare metal application

Mahalakshmi Iyadurai1

Prodigy 180 points

Part Number: CC2651R3SIPA

Tool/software:

we are using cc2651rsipa device for our short distance communication,

we have space constraints on the PCB and unable to mount the degugger connector

for programming the device.

Please support in programming the device using over the air upgrade option.

Thank you,

with regards

I.Mahalakshmi

1 month ago

0 Clément 1 month ago

TI__Guru* 99710 points

Hi,

Thank you for reaching out.

I understand you are looking at programming a blank CC2651R3SIPA device without using the debug interface.

I am afraid a blank device cannot perform an over-the-air download.

Instead, I would recommend leveraging the serial bootloader (allowing to download through SPI or UART) as described in the following app note: https://www.ti.com/lit/swra466

I hope this will help,

Best regards,

0 Mahalakshmi Iyadurai1 1 month ago in reply to Clément

Prodigy 180 points

We are using bare metal application,

How we can use the Over the air upgrade to save the physical connector space on the PCB.

Please support,

with thanks and regards,

I.Mahalakshmi

0 Clément 1 month ago in reply to Mahalakshmi Iyadurai1

TI__Guru* 99710 points

Hi,

I’ll close this thread to avoid duplication of information.

Thank you for your comprehension,

Regards,

Other wireless

Other wireless technologies forum

CC2651R3SIPA: over the air upgrade of cc2651rsipa in bare metal application