LP-CC2652RSIP: CC2652RSIP with oled

Kumaravel N

Intellectual 473 points

Part Number: LP-CC2652RSIP
Other Parts Discussed in Thread: CC2652RSIP, SYSCONFIG

Tool/software:

please send an exaple code for CC2652RSIP with oled(for US2066 controller ) for no rtos with spi

how to do with sys config and how to connect with hardware connection

As LP cc2562rsip we work on 3.3 v so how to connect oled (US2066) for 3.3v

10 months ago

0 Toby 10 months ago

TI__Mastermind 35070 points

Hello,

For US2066, according to their documentation it supports I2C and SPI.

For our device, we have examples of both serial interfaces (including nortos):

You can base the development from this, and also refer to the US2066 specification for data protocol.

Thanks,
Toby

0 Kumaravel N 10 months ago in reply to Toby

Intellectual 473 points

thank you this example have free rtos and ti rtos but I want No RTOS code kindly support

If I want No RTOS then I should use free rtos

0 Toby 10 months ago in reply to Kumaravel N

TI__Mastermind 35070 points

If you want no RTOS, then you can start with the empty NoRTOS example: https://dev.ti.com/tirex/explore/node?node=A__AAyUc0JgmSQTmfJYEmHALw__com.ti.SIMPLELINK_CC13XX_CC26XX_SDK__BSEc4rl__LATEST

And add the required serial drivers through sysconfig.

+1 Kumaravel N 9 months ago in reply to Toby

Intellectual 473 points

Thankyou toby, I have found I2c to be working , In my spi code , i could not reduce the clock speed from1 Mhz , though the US2066 controller based OLED , from NewHaven could support SPI , the clock could not able to wake the OLED.

Other wireless

Other wireless technologies forum

LP-CC2652RSIP: CC2652RSIP with oled