Tool/software:
We've been using the CC2640R2F for our IoT development for the last few years, but are interested in a new version with integrated USB flashing. Is there a reference design that would enable that?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
We've been using the CC2640R2F for our IoT development for the last few years, but are interested in a new version with integrated USB flashing. Is there a reference design that would enable that?
Hello Billy,
Since the CC2640R2F does not have an on-board USB peripheral you will need to use a XDS110 to flash the CC2640R2F device.
https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds110.html
https://www.ti.com/tool/LP-XDS110
https://www.ti.com/tool/TMDSEMU110-U
Regards,
Ryan