CC2340R2: Beacon(transmit non-connectable ADV and connectable ADV at the same time)

O.H

Part Number: CC2340R2
Other Parts Discussed in Thread: SYSCONFIG

Hi expets,

Q1) When using Beacon, is it possible to transmit connectable advertising at the same time?
We want to transmit non-connectable ADV and connectable ADV together—either by switching over time or by transmitting simultaneously on different channels.

Best regards,
O.H

8 months ago

0 Alex Fager 8 months ago

TI__Genius 15634 points

Hello O.H

Can you clarify to me which stack si this on? (BLE, Zigbee?)

Thanks,
Alex F

0 O.H 8 months ago in reply to Alex Fager

Mastermind 7170 points

Hello Alex F,

Thank you for your reply.

My customer has considering CC2340 for BLE.

Best regards,
O.H

0 Alex Fager 8 months ago in reply to O.H

TI__Genius 15634 points

Hello O.H,

I have notified our BLE expert of this thread since we confirmed the stack and they should be with you shortly.

Thanks,
Alex F

+1 David 7 months ago in reply to O.H

TI__Genius 16825 points

Hello,

Sure you can. A peripheral can send both connectable and non-connectable advertisements concurrently, by using different advertisement sets. You can configure the number of advertisement sets using SysConfig -> BLE -> Broadcaster Configuration -> Number of Adv Sets, and there configure both as you prefer.

BR,

David.

0 O.H 7 months ago in reply to David

Mastermind 7170 points

Hi David, Alex F,

Thank you for your support. I understood.
Generic Access Profile (GAP) — SimpleLink Low Power F3 SDK BLE5-Stack User's Guide 9.14.00 documentation

Best regards,
O.H

Other wireless

Other wireless technologies forum

CC2340R2: Beacon(transmit non-connectable ADV and connectable ADV at the same time)