Other Parts Discussed in Thread: CC2511
Hi all,
I have devloped CC2511 radio based board and have successfully programmed board with CCdebugger. But suddenly my board does not gets detected with CCDebugger, what may be cause for same?
I am measuring current consumption of board and i have kept the board in PM1 permanently to check current consumption of board nad once i have downloaded above hex file after that i am not able to detect my devlopment board with CCDebugger.
My development board also measures current consumption to around 12ma, while in data sheet it suggests that it should consume around 4ma in PM1 mode, what may be reason for same?
Regards,
Lalit