CC2500 patable

Yu Zhang10589

Other Parts Discussed in Thread: CC2500

Hi all:

For the patable of CC2500, we only the first entry or the first two entries (for OOK). What we going to write to the rest of the table?

Patable is a 8 byte table.

Thank you

0 BrandonAzbell over 17 years ago

There is a default power setting specified in Table 30 on page 48 of the CC2500 datasheet as being set to 0xC6, or -12dBm.

It doesn't appear that you need to set the other entries, if they are not used for the mode you are implementing.

0 Yu Zhang10589 over 17 years ago in reply to BrandonAzbell

Expert 1100 points

Thank you BrandonAzbell.

Other wireless technologies forum