• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 173 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC251x: Typo in DN114 (SWRA241A): "Test Signals for debug purpose"

spachner
Expert 1535 points
Other Parts Discussed in Thread: CC2511

Hi,

I tried the setting OBSSEL3=37 on a CC2511 which should according to the documention output the fref = 24MHz. But the chip outputs actually fxosc which is 48MHz. Seems to be a typo.

The debug output seems to output fxosc rather than fref: fRef = fxosc for CC2510Fx and fRef = fxosc/2 for CC2511Fx

regards

spachner