Access point as transmitter

UMAMAHESH Y V

Other Parts Discussed in Thread: SIMPLICITI, CC2500

Hi to all,

Currently working on CC2500 USB kit and making a study on SimpliciTI protocol and I was making modifications on demo_AP.c and demo_ED.c.My modifications as follows making Access Point as transmitter and End device as receiver and also to make them bi directional,is it possible if yes what should be followed.please guide me.

Thanks & Regards

Umesh

over 16 years ago

0 Morten Braathen over 16 years ago

TI__Mastermind 19525 points

Hello,

In our SimpliciTI release we have a great document that can be of help to understand the multiple Sample Applications avaiable

This document can be found in the default installation folder of the SimpliciTI release.

[C:\Texas Instruments\SimpliciTI-1.0.6\Documents\SimpliciTI Sample Applications Guide.pdf]

SimpliciTI can be found here: http://www.ti.com/simpliciti

LPRF Rocks the World

0 UMAMAHESH Y V over 16 years ago in reply to Morten Braathen

Intellectual 780 points

Can I make Access Point and End device to send and receive messages.Other doubt is should linklisten() be followed by recieve() or it can be send() too

0 Kjetil over 16 years ago in reply to UMAMAHESH Y V

TI__Mastermind 21125 points

Hi.

By default every link in SimpliciTI is bi-directional, one can choose to only use them uni-directional but from SimpliciTI point of view one can always both send and receive on the same link.

Kjetil

Other wireless

Other wireless technologies forum

Access point as transmitter