• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 17 subscribers
  • Views 250 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

using IAR Embedded Workbench for programming/debugging Hardware interface Example

edward soukessov
Prodigy 180 points

I am complete novice to this subject. I am using CC2530ZNP Mini Kit according to Quick Start Guide.

So i started as recommended with the simplest example - Button Blink. Everything went as it was described in the manual -LED started t blink.

After finishing this example i can't return to initial state - LED continue blinking. I removed USB stick with coordinator from and it did not help.

After inserting it into USB LED continue to blink.

My question is - what should be done to remove code from board and return it into initial state - that is no LED blinking.

PLS help me to resolve this puzzle