Continuous un-modulated transmit mode on the CC1101

TI Lady

Other Parts Discussed in Thread: CC1101

I need to enable continuous un-modulated transmit mode on the CC1101 for some RF testing. I imagine it is a case of sending a few commands to the device. Just a matter of knowing which ones. Please help!

Thanks!

over 12 years ago

0 Sverre over 12 years ago

TI__Mastermind 39860 points

You get register settings from SmartRF Studio. Select the "Continuous TX" tab and tick off "unmodulated". In your SW, using the settings from SmartRF Studio, you issue an STX strobe to start TX

0 LeonardEllis over 12 years ago

TI__Guru 71526 points

Also note the EXAMPLES LIBRARY: http://www.ti.com/lit/zip/swrc021 contains many examples of various modes of operation. In this particular case, look at the "InfiniteLink" code examples.

-Leonard

Other wireless

Other wireless technologies forum

Continuous un-modulated transmit mode on the CC1101