CC1101 package differences

Cheok Loon Lee

Other Parts Discussed in Thread: CC1101

I noticed that TI had changed the part number in the website from CC1101RTK to CC1101RGP. Is this a one-to-one drop in replacement for CC1101RTK? Is there any changes needed on the PCB design or firmware design?

Lee

over 13 years ago

0 Sverre over 13 years ago

TI__Mastermind 39860 points

The new package is a drop-in replacement. No changes to HW / PCB required.

0 TER over 13 years ago

TI__Guru**** 317180 points

We have changed package on the CC1101. The hardware is not changed so no firmware changes are required and the existing PCB footprint can be used. Hence the transition from CC1101RTK to CC1101RGP does not require any action from the customer.

0 Ran Feldman over 12 years ago in reply to TER

Intellectual 780 points

CC1101 PCN CHANGES RTK to sawn RGP, Is there any summary of electrical specs differences between the old and new package? For instance is there a difference in power consumption? dBm etc.

Thanks,

Ran

0 Sverre over 12 years ago in reply to Ran Feldman

TI__Mastermind 39860 points

There are no differences in performance between RTK and RGP

0 Henri Lassiaille over 11 years ago in reply to Sverre

Prodigy 30 points

So can you tell me what is the differences between those two?
I designed a layout using the ez430RF2500 references design.
Do you know if the RGP fits with this (old) footprint?

Best regards,

Henri

0 TER over 11 years ago in reply to Henri Lassiaille

TI__Guru**** 317180 points

The same footprint may be used.

Other wireless

Other wireless technologies forum

CC1101 package differences