Sensinode startup

SAI KUMAR PONNERI

Other Parts Discussed in Thread: CC430F5137, CC2538, CC1120, CC1101, CC2520

Hi,

I am using CC430F5137. I have got the sensinode code in this link. http://www.sensinode.com/media/ti-cc-6lowpan/cc430f5137-library-model.zip

Pls give me suggestion how should i start the coding and UART,port,RF network initialisations.

Thanks in advance.

Regards,

Sai Kumar

over 13 years ago

0 Firefighter over 13 years ago

TI__Genius 12480 points

Hi,

Please take a look here: http://processors.wiki.ti.com/index.php/CC-6LoWPAN

May I ask what your application is? We are developing new 6LoWPAN solutions that might be a better option.

Regards,

Jonas

0 jan2809 over 13 years ago in reply to Firefighter

Mastermind 7850 points

Hi Jonas,

Can you tell more about the new 6LoWPAN solution?

Jan

0 SAI KUMAR PONNERI over 13 years ago in reply to Firefighter

Prodigy 105 points

Hi,

I had gone through the link provided by you.I need fewer suggestions on the API's Initialisation.And the parameters to be configure or read from the API.

Application is to create a network and send/receive data between nodes in 6LoWPAN.

0 Firefighter over 13 years ago in reply to jan2809

TI__Genius 12480 points

Jan,

Yes, we are working with a company called thingsquare (www.thingsquare.com) to provide a fully open source 6LoWPAN stack. The Thingsquare system is based on Contiki OS and IPv6, and adds features like Over the Air download, AES encryption, small layers to ease the use of APIs, a lot more easy to use examples, etc.

TI component support:

CC2538
MSP430
CC1120
CC1101
CC2520

The software runs out of the box on SmartRF06EB + CC2538EM, and TxrEB plus CC1120/CC1101/CC2520EM.

Jonas

0 Juan Sebastian Morant Pedroza70603 over 12 years ago in reply to Firefighter

Intellectual 355 points

Hello Jonas,

How are you doing with the open source 6LoWPAN stack? Do you have any release date?

Best regards,

Juan Morant

Other wireless

Other wireless technologies forum

Sensinode startup