Reference design for cc2530 + pcb inverted F antenna

Hugo Morais

Other Parts Discussed in Thread: CC2530, CC2541

Hello,

I would like to use cc2530 + pcb inverted F antenna.

Can anyone tell me where can I find a reference design for the RF part between IC and the antenna ?

Thank you,

Hugo

0 PM over 11 years ago

Hi,

Attached is the complete design (swrr067) file with Antenna.

Thanks,

0 Fredrik K over 11 years ago in reply to PM

If you have room for it you can use a discrete component balun and/or a slightly bigger antenna, as in this reference design:

Cheers,

Fredrik

0 Pedro Amaro over 11 years ago in reply to Fredrik K

Hello:

I saw this post and I have a similar problem. I'm considering using this breakout board

http://processors.wiki.ti.com/index.php/CC2541_Breakout_Board

for the cc2541 and use it with the cc2530.

I'm wonder it the RF part of the design will work on the CC2350 because the rest must be adapted to my needs.

Tks for your ansewer.

Pedro

0 Fredrik K over 11 years ago in reply to Pedro Amaro

Hi Pedro,

That design will work for the CC2530 also.

Cheers,
Fredrik

Other wireless technologies forum