• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1200 How to enter RXDCM

Yane
Intellectual 320 points
Other Parts Discussed in Thread: CC1200

Hi all,

I check the RXDCM function of CC1200.

I found in user's guide (SWRU246B) section 9.7,

"To enter RXDCM, an SRX strobe should be issued when WOR_CFG0.RX_DUTY_CYCLE_MODE ≠ 0".

But, Rx duty cycle mode configuration bit (WOR_CFG0.RX_DUTY_CYCLE_MODE)  is specified "Read only" in User's Guide page 92.

 

How to enter RXDCM ?

 

Regards,

Yane