Range extender reference design for CC2650?

Ron Segal20

Intellectual 360 points

Other Parts Discussed in Thread: CC2650, Z-STACK, CC2592

Is there a suitable range extender reference design for the CC2650 (CC26XX)?

In any case is a power amplified design always recommended to be 4 layers? 2 would be preferable to minimise costs.

Best wishes, Ron

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735705 points

As I know, the CC2650 range extender solution is not yet ready for Z-Stack. If you have to use range extender, I suggest you to contact TI local representative for help.

0 Ron Segal20 over 11 years ago in reply to YiKai Chen

Intellectual 360 points

Hi YiKai
Thanks for your response. Actually Z-Stack is not an issue as our target OS is Contiki. In any case I guess that we'll have to wait, although an eta from TI would be helpful. The 2 versus 4 layer question is of particular interest, as if it has to be 4 layers we might use the CC2592 stand alone range extender design, as not all units will need to support extended range. Best wishes, Ron.

0 YiKai Chen over 11 years ago in reply to Ron Segal20

Guru 735705 points

Power amplified design always recommended to be 4 layers.

Other wireless

Other wireless technologies forum

Range extender reference design for CC2650?