• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 17 subscribers
  • Views 577 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Build error on ccs.

Qwerty0987
Prodigy 180 points

Other Parts Discussed in Thread: CC2650

Hi,

When I am trying to build the sensor tag cc2650 project on CCS, I am getting an error saying:

Description Resource Path Location Type
xdc.cfg.SourceDir: "C:/ti/xdctools_3_30_06_67_core/packages/xdc/cfg/SourceDir.xs", line 184: xdc.cfg.SourceDir : Build of generated source libraries failed: exit status = 2: appBLE.cfg /SensorTag/TOOLS C/C++ Problem

Please tell me how to resolve this issue.

  • 0
    TI__Guru** 105180 points
    Hello,

    Details are pretty scarce, so can't offer much guidance other that confirm you installed the SDK according the SW Developer's Guide (SWRU393) and confirm the TI-RTOS is installed correctly. Verify that your Linked Resources in CCS point to valid directories. Perhaps uninstall TI-RTOS & BLE SDK, then re-install.

    Best wishes
  • 0 in reply to JXS
    Prodigy 180 points

    Hi,

    First I have copied the whole C:\ti\simplelink\ble_cc26xx_2_00_00_42893 folder (which contains all the projects of CC2650) to a different location. Then I removed all the files and directories which are not used in the SensorTag project. I built that project and it worked without any errors or warnings.

    After this I have pushed this project folder to Bitbucket git repository. When I clone this project on a different location or a different PC, and build it, I get the above mentioned error.

    i.e.,

    Description Resource Path Location Type

    xdc.cfg.SourceDir: "C:/ti/xdctools_3_30_06_67_core/packages/xdc/cfg/SourceDir.xs", line 184: xdc.cfg.SourceDir : Build of generated source libraries failed: exit status = 2: appBLE.cfg /SensorTag/TOOLS C/C++ Problem