• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 1077 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Validation check error(MSO profile)

young june kim
Intellectual 710 points
Other Parts Discussed in Thread: CC2533

Hi

 

I developed remote controller.

My system is below.

-. Stack: RemoTI-CC253xDK-1.3.1-MSO-2014-07-15_Patch_v1.1.1.0

-.chiset: cc2533

 

Peer device(settopbox) chipset is GP.

Previous model is GP chipset remote controller.

I want to change TI chipset remote controller form GP chipset remote controller.

I want to develop compatible with settopbox(GP chipset).

But I have a problem about validation check error.

 

It is not auto validation.

And settopbox don’t display validation key code.

But It receives MSO_CHECK_VALIDATION_STATUS_ABORT error message from msoControllerProcessCheckValidationRsp .

 

I attach air log(GP solution(no error) and TI solution)

ti_cature_remoteconroller_2015_08_19.psd

GP_cature_remoteconrolle.psd