Errors in eagle schematic output for simple switcher design

Aaron Howard2

Other Parts Discussed in Thread: CC2500

Hello,

I have noticed I am getting errors when trying to open the exported schematic for eagle. I am running eagle 7.2 and ran the scripts and enabled the created library for the library parts. It seems like the inductor is the main issue I see attribute name of IDC and eagle is not alllowing me to open the schematic due to that. Anyone else seen a similar issue?

Thanks for the help,

Aaron Howard

over 10 years ago

0 Sivaraj Kuppuraj over 10 years ago

TI__Mastermind 35645 points

Hi,

Aologies for the late response.

We will work on this and willl let you know the update at the earliest.

Thanks & regards,
Sivaraj K

0 Sivaraj Kuppuraj over 10 years ago in reply to Sivaraj Kuppuraj

TI__Mastermind 35645 points

Hi,

Moving your post to right forum to be better answered.

May be, i am not sure the below E2E post would help you for desinging CC2500 app.:

e2e.ti.com/.../38369

Thanks & regards,
Sivaraj K

0 Senthilkumar Srinivasan over 10 years ago

TI__Mastermind 43660 points

Aaron,

Which schematics you are trying to export to Eagle ?

What is the native tool that schematics was created ?

Regards,
Senthil

Other wireless

Other wireless technologies forum

Errors in eagle schematic output for simple switcher design