NFC antenna booster

Ray - 

Is  this for transceiver side or tag side? and how small of an antenna coil do you expect to have? what is expected read/write distance (for entire system, i.e. both sides)? 

OK, how about the reader side power out and antenna size and which air interface protocol do you intend to use? (i.e. ISO14443A, ISO14443B or ISO15693)?

Ray - 

this forum is for Texas Instruments customers

if you would like support for example regarding using the RF430CL330H in conjunction with a CC2564 or CC2640/50, for example, we can assist you further. 

regarding the technical details regarding using the Nordic device, i can see why you are reaching out - in their infocenter it looks like they want you to learn alot about configuring and using the device for NFC and i could not find a great deal of information about the antenna requirements either. 

Please do give the RF430CL330H + CC2xxx a look - and then we can also then help you out on the technical side.

the reader side, since i am not sure that had been made 100% clear here - is a handset or tablet, is that correct?

you may need / most likely will need a larger tag antenna than what you are planning if that is the case.