Hi All TI Members,
Good Evening (Indian time).
Please clarify my Question.
I observed a problem in communication between Our Radio & TI development board. Both radios having similar kind in circuit design.
Q-1: If I transmit a data from my board to TI Kit, Kit is receiving, but If I send a data from TI board to my board, my board is not receiving. Why?
FYI, Settings in both radio's are same.
1. Data rate (9.6 kbps).
2.Transmit time: 300 ms.
3. Packet length is 19
4. Modulation : 2-FSK.
Waiting for prompt reply.
Thanks & Regards,
Tarakeswar
