I have bought the SmartRF06EB and CC1310EM, when I tried to measure the current of the EM, I found the TP11 has no signal at all. Carefully looked the board I found the U504(INA216 is not loaded. I wonder why?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I have bought the SmartRF06EB and CC1310EM, when I tried to measure the current of the EM, I found the TP11 has no signal at all. Carefully looked the board I found the U504(INA216 is not loaded. I wonder why?
As I know, current measurement unit (U504) is removed because it would consume extra current and make measurement inaccuracy. You can refer to 6.12.2 Current Measurement Jumper in swru321a -srf06 user guide to show you how to measure current consumption from SmartRF06EB.