• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 928 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MRD2EVM: Exporting data from Microreader Ii software

Gary Wall
Prodigy 15 points

Part Number: MRD2EVM

Hi,

I recently purchased the MRD2EVM Microreader Eval kit to read Triathlon chips. Able to read them on the LF /HDX+ tab

(driver is com13)

I can see the Byte 3,2,1,0 in hex is the data I need

I now wish to either cut or past the hex numbers into a spread sheet  or directly read/input them

the software supplied doesn't allow to copy and paste

Any suggestions welcome

 Cheers

  • 0
    TI__Guru*** 135355 points
    Hello Gary,

    For starters, the software provided is for demonstration purposes, so you will need to eventually develop your own for your system.

    As for getting the data right now as you evaluate, presuming the GUI uses a UART terminal (I don't know this for sure, haven't used the GUI myself), you could determine what packets you need to send to the device in order to read the tag, and then use a UART terminal yourself to send the command and then receive the bytes in the terminal.
  • 0 in reply to Ralph Jacobi
    TI__Guru*** 135355 points
    Hello Gary,

    I've sent you an E2E friend request to provide you another option for this via private message.