• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 699 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RF430FRL152H: Unused ADC0, ADC1 and ADC2 pin connections

Baranidaran Panneer Selvam
Prodigy 70 points
Part Number: RF430FRL152H
Other Parts Discussed in Thread: RF430FRL154H

I would like to interface an I2C based sensor to RF430 NFC Transponder. In the application, I'm not going to use the ADC pins (ADC0 - ADC2, Pins 13, 17 and 18). Please advise, if I can leave the pins unconnected.