• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 691 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

13.56 Mhz HF RFID with 1W output.

Vadim Morgunov
Prodigy 30 points

Hello,

I'm looking for a 13.56 Mhz RFID reader/writer that outputs 1W ~ 30dBm of power and I cannot find one.

Is there reason for that? Could some one point me towards a site/vendor where i can one one?

Thank you,

-Vadim

  • 0
    TI__Guru*** 135355 points
    Hello Vadim,

    High power NFC readers are harder to design and usually are a system solution which incorporates a lower output power IC with external analog circuitry to amplify the power output of the transceiver to get to such levels.

    One vendor I know of that sells high power readers is Feig Electronics. Others on the forum may have additional suggestions.