eZ430-RF2500T PCB layout

Mike Unger

The PCB layout of this board shown in figure 13 of SLAU227E is ridiculous .... and useless. I *don't* need to see where the etch is, I just need the part outlines and the Ref Deses. Is this available somewhere? The layout shown of the eZ430-RF board in figure 11 is better .... but too small, I can't read it either.

Thanks.

Mike

over 15 years ago

0 H Stewart over 15 years ago

Mastermind 8170 points

Have you seen C:\Users\Office7\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\XZYMXLJV\slac255[1].zip ?? There are Gerbers etc.

You can download ViewMate for free from Pentalogix to view and measure them. There are also Eagle schematic and layout files and some pdf files.

0 Mike Unger over 15 years ago in reply to H Stewart

Intellectual 470 points

Huh?

Are you suggesting there is a technical document slac255.zip that may have the gerber files of the eZ430-RF2500T board? I do not find that file on the TI web-site anywhere.

You seem to be giving me a link to the file on your computer? If you have this file I'd appreciate it if you emailed it to me.

Thanks.

Mike