LMH2110: LMh2110 delay time signal out

marcelo jose

Part Number: LMH2110

Hello, I am measuring the communication by bluetoth with this chip and at the output of it I observe the
next waveform with a decay when the signal is stilled, this is correct
time constant (202 useg) ??
Thank you very much for your reply.

LMH2110.docx

over 7 years ago

0 Clay Uhing over 7 years ago

TI__Prodigy 280 points

Hi Marcelo,
We have received your question and I have sent it to an engineer familiar with this device.
Best Regards,
Clay

0 dBrock over 7 years ago

TI__Genius 12780 points

Hi Marcelo,

This same decay is seen on the LMH2110EVM (Evaluation Module). I measured this using a 1.9 GHz, 0 dBm input signal and +5VCC supply voltage.

I also changed the input frequency and power (800 MHz and -20 dBm), but, as expected, the decay time was still the same.

Best Regards,

Dan

Other wireless

Other wireless technologies forum

LMH2110: LMh2110 delay time signal out