CCS/LAUNCHXL-CC1352R1: BLE Central mode and Ti 15.4 stack mode on CC1352

Pu PiPo

Intellectual 750 points

Part Number: LAUNCHXL-CC1352R1
Other Parts Discussed in Thread: CC1352R

Tool/software: Code Composer Studio

i am doing an project , i have to use dual mode BLE central and 15.4 stack on CC1352R .

Except use DMM to config dual mode BLE and 15.4 Stack , are there the other way to use dual mode above ??

over 7 years ago

0 Jessica H. over 7 years ago

TI__Genius 11535 points

Hello Pu,

You can find information on this in the DMM section of the CC13x2 SDK BLE5 User's Guide: dev.ti.com/.../index.html

Also, there are a few 15.4 and BLE examples in the 2.20SDK for CC1352R and there is a DMM Fundamentals lab in SimpleLink Academy v2.20 that
dev.ti.com/.../

Let me know if this helps and if you have any more questions.

Jessica

0 Pu PiPo over 7 years ago in reply to Jessica H.

Intellectual 750 points

Hi Jessica,
The DMM has only been tested/characterized using TI BLE5-Stack operating in peripheral mode alongside either the Wireless Sensor Network Easylink example or the TI 15.4 sensor example.
How do i use BLE in central mode with TI15.4 sensor ?

0 Jessica H. over 7 years ago in reply to Pu PiPo

TI__Genius 11535 points

Hi Pu,

Unfortunately our R&D team hasn't characterized BLE in central mode with the TI15.4 sensor yet. There might be a way in the future, but the master device isn't suppose to miss any connection events which would conflict with how the DMM functions.

-Jessica

Other wireless

Other wireless technologies forum

CCS/LAUNCHXL-CC1352R1: BLE Central mode and Ti 15.4 stack mode on CC1352