TIDC-WL1835MODCOM8B: TIDC-WL1835MODCOM8B

perry v

Hi TI team,

Good morning,

We are planing to use TIDC-WL1835MODCOM8B for our new simulation.

I have checked in website, i didnt find board file in .brd format, if possible can you upload .brd format or ODB++ file .tgz format.

Thank you,

Peri

over 5 years ago

0 Rizwan Murji over 5 years ago

TI__Genius 12260 points

Hi Perry,

Unfortunately we don't have this design in .brd format. It was designed using PADS. you can download a free viewer for this. The other option is to import the Gerber files where you can then get the exact metal that was used. When you go to design file, there is an option to download the gerber files. In the layers plot section, you will find the .brd file.

Hope this helps.

Thanks,
Riz

0 perry v over 5 years ago in reply to Rizwan Murji

Prodigy 20 points

Hi Rizwan,

Thanks for your input. I will check it and update you.

Thanks

Perry

0 Rizwan Murji over 5 years ago in reply to perry v

TI__Genius 12260 points

Your welcome!

Thanks,
Riz

Other wireless

Other wireless technologies forum

TIDC-WL1835MODCOM8B: TIDC-WL1835MODCOM8B