Re Document for test Harness.msg

Srikanth bellampalli

Other Parts Discussed in Thread: CC2650

i have installed FLASH-PROGRAMMER-2:

SmartRF Flash Programmer v2 and connected cc2650 but the device is not being recognized by the application. Could you please provide the resolution for this. please!

thank you.

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735705 points

Try to refer to Packet Sniffer section in dev.ti.com/.../

0 Severin Suveren over 7 years ago

TI__Mastermind 23730 points

Are you using LAUNCHXL-CC2650?

0 Srikanth bellampalli over 7 years ago in reply to Severin Suveren

Prodigy 60 points

Hello Edvard,,

thank you for the response.

Yes, I am using LAUNCHXL-CC2650.

My laptop settings shows that the drivers are not available.

Could you please help me out.

thank you.

0 Srikanth bellampalli over 7 years ago in reply to Srikanth bellampalli

Prodigy 60 points

Could anyone provide me the drivers related to launchXL-cc2650 to be able to recognize by SmartRF Flash Programmer v2?
please provide inputs.
thank you.

0 Severin Suveren over 7 years ago in reply to Srikanth bellampalli

TI__Mastermind 23730 points

Can you open Device Manager and verify two COM ports for the XDS110 are showing up?

0 Srikanth bellampalli over 7 years ago in reply to Severin Suveren

Prodigy 60 points

yes there are two devices listed with same name as XDS110. But smartrf flash programmer is not recognizing the device and connect is not working. I mean the arrow button is not turning green. could you please provide your suggestions.?

0 Severin Suveren over 7 years ago in reply to Srikanth bellampalli

TI__Mastermind 23730 points

Are the two COM ports showing up in the "Connected devices" window?

0 Severin Suveren over 7 years ago in reply to Severin Suveren

TI__Mastermind 23730 points

Any updates on this?

Other wireless

Other wireless technologies forum

Re Document for test Harness.msg