CCS/TRF7960ATB: Interfacing RFID Module with MSP432P401R

Uday Singh Sirohi

Prodigy 20 points

Part Number: TRF7960ATB
Other Parts Discussed in Thread: TRF7970A

Tool/software: Code Composer Studio

Is there a library available for interfacing TRF7960ATB with MSP432P410R?

In case there is one, then do provide the link for it.

over 7 years ago

0 Helfried Vollbrecht over 7 years ago

TI__Mastermind 18265 points

Hello Uday,

we have an example source code for the TRF7970ABP + MSP432P410R.
You will find this code when installing the NFC software:

www.ti.com/.../sloa227

in the folder:

C:\ti\nfc\TRF7970A_RW_1.03.00\examples\boards\MSP-EXP432P401R

Best Regards,
Helfried

0 Uday Singh Sirohi over 7 years ago in reply to Helfried Vollbrecht

Prodigy 20 points

Hello Helfried,

Are there any resources where I can get a complete go through of interfacing TRF7690ATB with MSP432P401R?

Regards,
Uday

0 Helfried Vollbrecht over 7 years ago in reply to Uday Singh Sirohi

TI__Mastermind 18265 points

Hello Uday,

we do not have a dedicated document for this interfacing.
Please see the schematics of the TRF79xx module.

The following document is for a different module but has the same connections. It can give you additional information for the interfacing.

www.ti.com/.../slou372a.pdf

Table 1 and Table 2 in this document explain all the signals that are needed for interfacing.

Best Regards,
Helfried

Other wireless

Other wireless technologies forum

CCS/TRF7960ATB: Interfacing RFID Module with MSP432P401R