• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 847 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RF430F5978: Protocol or dll

Kevin Xiong
Expert 2340 points
Part Number: RF430F5978


Hi,

I'm using RF430F5144, and the calibration kit is RI-ACC-PTB2 and RFID Demo Software as attachment. Now we want to develop our own manufacturing kit using VB.

Could you please provide the protocol or dll of the RFID Demo Software?

Thanks.

Kevin Xiong

  • 0
    TI__Guru*** 135355 points
    Hello Kevin,

    The device and likely the software you are referencing are covered under TI NDA policies, while there is a publicly available GUI for certain catalog tags which can be downloaded from: www.ti.com/.../swrc164 there is not a public download for entirety of the GUI you shared via screenshot. Customers are granted proper access when filling out appropriate NDA's. I would recommend you reach out to your local TI contacts to request access for the full GUI as we cannot grant that here on E2E.
  • 0 in reply to Ralph Jacobi
    Expert 2340 points
    Hi Ralph,
    You mean that I should contact local sales to get the protocol or dll? But I suppose that the local sales will come to backend. Thanks.
    Thanks.
    Kevin Xiong
  • 0 in reply to Kevin Xiong
    TI__Guru*** 135355 points
    Hello Kevin,

    It wouldn't be a dll, but yes to get full access you will need to reach out to local sales because the portions of the GUI that are not accessible are covered under NDA and thus we do not handle that on E2E in any manner.