LAUNCHXL-CC2650: CLI Program fail - Windows Command mode

user4793539

Intellectual 580 points

Part Number: LAUNCHXL-CC2650
Other Parts Discussed in Thread: CC2650

We often encounter program fail when we program the cc2650 by CLI in windows command mode。

From the pictures ,we found sometimes not execute Start flash erase, sometimes reset target with no response。

Can you help me? We need this to manufature our products,, thanks!

over 6 years ago

0 user4793539 over 6 years ago

Intellectual 580 points

The tool is ti CC2650 LaunchPad. We use the xds110 of the launchpad to program cc2650 mcu.

0 TER over 6 years ago in reply to user4793539

TI__Guru**** 317180 points

Could you test the newest version of Flash Programmer 2?

Does the pictures show the full logg when you use the program? Is is the program just hanging as the two "black" windows seems to show?

Also, instead of taking picture of the screen, is it possible to use the snipping tool in windows or similar since this makes it easier to read.

0 user4793539 over 6 years ago in reply to TER

Intellectual 580 points

We now use SmartRF_Flash_Programmer-2-1.7.5. What's the newest version?

Where can I download the newest version of Flash Programmer 2?

The pictures show almost the full logg , when we try to use the program several times (maybe 1- 20), the program just hanging as the two "black" windows seems to show.

0 TER over 6 years ago in reply to user4793539

TI__Guru**** 317180 points

Other wireless

Other wireless technologies forum

LAUNCHXL-CC2650: CLI Program fail - Windows Command mode