• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 268 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TRF7960A: How to config TRF7960A for non-stop read and write.

daniel
Genius 5095 points
Part Number: TRF7960A


Hi Team,

For verification test, TRF7960A need to keep reading and writing, so that the measure would be easier.

Please teach me how to set TRF7960A for non-stop read and write.

Thanks

  • 0
    TI__Mastermind 18265 points
    Hello Daniel,

    if I understand your request correct, you want to do a continuous read from a tag or continuous write to a tag.

    The TRF7960A can not work in a continuous mode by itself.
    This has to be achieved by the controlling processor firmware or the controlling GUI.

    Are you using some TI EVM or TI demo software?

    Best regards,
    Helfried