CC2650: CC2650 i cloud

1. Data is sent to IBM Quickstart by default if you enable "Push to cloud"

2. It should be possible. You can click Edit button in Config Summary and select "Advanced configuration" to setup connection to your own cloud.

3. I think it means that it can connect to IBM clould, Amazon Web Service IoI,...

hi YK

please if you can tell me :

(for the advanced configuration , how i can setup my cloud ), if I am using MQTT and what I need to use for Broker Address & Broker Port ( can I but the PI and port No. ) ,or if you can send my the steps for that 

thanks 

Since you use your own MQTT server, I suppose you should know your own broker address and port.

hi 

in the (app / ios) , I put the IP adders with port No. ( MQTT / port 8883) , and I open the putty in my PC ( but I do not see any data ) 

you can help 

thanks 

I suggest you to set up wireshark to check if the MQTT connection is setup first.

hi

YK, please see the attachments 

What do you want me to check?

the icloud ( not open ) , YK (I am very new in this , so if you can explain to me or send me the steps for ( how i can send the data to my cloud )

thanks  

I don't have step-by-step guide on this. Since your MQTT server is on intranet IP 192.168.2.172, you should make sure your smart phone connect to the same domain 192.168.2.xxx using Wifi connection.

hi YK 

I do not have a router, and I am using my phone ( internet by the GSM) , so can i send the data to i cloud or not 

because this is a mobile application that should  not relay on wireless LAN  

thanks 

Since 192.168.2.172 is not a internet IP, you will need to setup an accessible fixed IP for your smartphone( internet by the GSM) can reach it.

Part Number: CC2650

I am using project zero in ( cc2650 launchpad ) , and i need to send my data to ( my icloud) , I am using MQTT and (GSM in my iphone ) ,so what i need to do for see the data 

thanks 

I had tried to help you in that post. Do you have new question to raise a new post?

yes, I am still working on ( how I can send the data to my cloud if I am using GSM )

thanks 

I already tell you that the problem is that your MQTT server IP is in Intranet. You need to have a public IP to run MQTT service.

YK 

I did and I have a public IP with port , I can not see my data when I send the data to the public IP 

If you have a public IP now, I would suggest you to use mosquitto client to test it first. Make sure mosquitto client can work with your MQTT server on public IP.