Part Number: TRF7970A
How to drive trf7970 working mode 0 and how to match the communication distance to 10cm on hardware
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TRF7970A
How to drive trf7970 working mode 0 and how to match the communication distance to 10cm on hardware
Hello,
please see the following document which describes the use of the direct modes for the TRF7970A:
http://www.ti.com/lit/pdf/sloa214
The communication distance that you can achieve depends a lot of the tag used, especial the ISO Standard, size of the antenna and the power consumption. Also the size of the reader antenna and the correct adjustment of the matching circuit will have an impact.
As additional information please have a look to the "Antenna Design Guide":
http://www.ti.com/lit/pdf/sloa241
Best Regards,
Helfried