• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 17 subscribers
  • Views 1090 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2500 and CC2543 connectting

Wu johnson
Prodigy 10 points

Other Parts Discussed in Thread: CC2500, CC2543, CC2541, CC2545, CC2544

Hi,

question 1 : The CC2500 can connecting CC2543 By GFSK or MSK ?

Quetsion 2:  If they can , How use SmartRF Studio 7 to testing it ? I had try to run the package TX (CC2543)and package RX (Cc2500) , But they didn't received.

 

Johnson

  • 0
    TI__Guru 56590 points

    Hello Wu, 

    Q1:

    I know the CC2500 can communicate with the CC2543 ( also the CC2541, CC2544 and CC2545 as well ) with MSK modulation at the bit rates 250 kbps and 500 kbps.

    But the CC254x devices only support frequencies in the integer MHz range (resolution of 1MHz, ex: 2400 MHz, 2401 MHz, ....). Make sure to choose a frequency plan for the CC2500 where all the frequencies are close enough to a complete MHz to be able to get a working link with the CC254x devices. The frequency error tolerance might decrease with longer payloads. 

    It might be possible to set up a link with GFSK modulation at 250 kbps, but I will have to test it. If you can use the MSK modulation I would advice you to use it.

    Q2:

    I have attached SmartRFStudio settings you can use to set up a test both ways with MSK modulation for 250 kbps and 500 kbps:

    2860.SmartRFStudio_settings_CC2500_vs_CC254x.zip 

    BR. Eirik