PUREPATH-WL-CFG: compatibilty windows 10

Matthieu Michel

Prodigy 75 points

Part Number: PUREPATH-WL-CFG

Hi E2E,

I would like to know if you have any news about the compatibility between Purepath studio and windows 10 ?

Could you please answer me.

Thank you.

over 4 years ago

0 Clément over 4 years ago

TI__Guru** 101460 points

Hello Matthieu,

I can confirm we have several users running Purepath Studio on Windows 10 and going to production with it.

Please let us know if you run into issues.

Best regards,

0 Matthieu Michel over 4 years ago in reply to Clément

Prodigy 75 points

Hi Clément,

Yes I have issues. My probe (CC debugger) is not detected by the PurePath Wireless Configurator. I'm using the release 1.4.2 Build 38775;

Could you help me please.

Regards

0 Clément over 4 years ago in reply to Matthieu Michel

TI__Guru** 101460 points

Hi,

Is the probe detected by other applications (such as Flash Programmer)?

Could you verify the probe is properly set using this guide? https://www.ti.com/lit/swru197

Best regards,

0 Matthieu Michel over 4 years ago in reply to Clément

Prodigy 75 points

yes we have already used this probe during years with windows 7 without any issues.

I 'm checking your user guide.

Regards

0 Matthieu Michel over 4 years ago in reply to Clément

Prodigy 75 points

The user guide says that's the supported operating system is windows 7 or 8 but no windows 10.

0 Clément over 4 years ago in reply to Matthieu Michel

TI__Guru** 101460 points

Hi,

I have run some tests and the CC debugger does work on Windows 10 on my computer.

You may have some missing drivers there.

Regards,

0 Clément over 4 years ago in reply to Clément

TI__Guru** 101460 points

Hi,

I am closing this thread due to inactivity.

If needed, please open a new thread.

Best regards,

Sub-1 GHz

Sub-1 GHz forum

PUREPATH-WL-CFG: compatibilty windows 10