CC1352R: collect sensor data from raspberry edge

jday de la calle

Part Number: CC1352R
Other Parts Discussed in Thread: UNIFLASH

Hi,

i use TI 15.4 STACK----LPSTK-CC1352R----CC1352P1

first I have a problem with the LPSTK-CC1352R sensor. the loaded image disappears after restarting.

second I would like to collect sensor data from my raspberry pi edge.

will you have any solution please?

+1 YiKai Chen over 3 years ago

Guru 735685 points

Which sensor example do you run you your LPSTK-CC1352R? if it has ota capability, you also need to download BIM into LPSTK-CC1352R.

0 jday de la calle over 3 years ago in reply to YiKai Chen

I use TI 15.4 DMM SENSOR FOR LPSTK-EU

how can i know it is ota capability ?

+1 YiKai Chen over 3 years ago in reply to jday de la calle

Guru 735685 points

If there’s OAD in the project name such as dmm_154sensor_remote_display_oad_app, it supports OTA.

0 jday de la calle over 3 years ago in reply to YiKai Chen

I add the dmm (.bin) and bim (.hex) in uniflash?

0 YiKai Chen over 3 years ago in reply to jday de la calle

Guru 735685 points

If you mean to use Uniflash to download both BIM and application firmware at the same time, I would suggest you use hex file.

0 jday de la calle over 3 years ago in reply to YiKai Chen

how to collect sensor data from my raspberry pi edge ?

0 YiKai Chen over 3 years ago in reply to jday de la calle

Guru 735685 points

0 jday de la calle over 3 years ago in reply to YiKai Chen

sensor data

0 YiKai Chen over 3 years ago in reply to jday de la calle

Guru 735685 points

This is more related to application development and you have to do it by yourself.

Sub-1 GHz forum