• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 55 subscribers
  • Views 194 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-CC1352P7: Ti_wisunfantund command line sometimes wrong

Kurama Bee
Intellectual 376 points
Part Number: LP-CC1352P7

Hi Team,

I am running wisunfantund on Linux host and using some commands

  • get connected devices: It shows different result every time I run that command even the number of connected devices unchanged
  • get dodagroute and get dodagroutedest never shows the expected result as the same the document 
  • 0
    TI__Guru* 81871 points

    Hi,

    1) How often are you running the get connected devices command? This command may cause an issue if you call it several times with no time between.

    2) When you run the dodagroutetest, how many devices are connected in the network?

    3) Which version of the SimpleLink SDK are you using?

    Cheers,

    Marie H

  • 0 in reply to Marie H
    Intellectual 376 points

    Hi,

    1) The get connected devices command is called 2 minutes after the initial one.

    2) dodagroute displays all devices that are connected.

    3) SDK version 5.40

    Another point to consider is the "revoke" command. I used it to remove one device from the network. However, the link is still maintained.