CC1311R3: CC1311R3

Alex Katsovich

Part Number: CC1311R3

Hello,

We started replacing of CC-430 to CC-1311 on our products.

To program CC-430 on production line we used FlashPro-430 programmer with application that provided by Elprotronic.

What the better option to program CC-1311 with minimal production jigs changes? Can we use FlashPro-430?

For information:

To program CC-430 we used Spy-By-Wire protocol and the lines: SBWTDIO and SBWTCK.

Thanks,

Alex Katsovich

Centrica (Panoramic Power)

0 Arthur R☑️ over 2 years ago

Hi Alex,

You will have to use another programmer, as the CC430 and the CC1311 use a different programming interface.

For the CC1311, you will have to use one of the ARM (cJTAG) programmer that this manufacturer offers, such as this one: https://www.elprotronic.com/products/flashpro-arm-1v-xs

Regards,

Arthur

0 Alex Katsovich over 2 years ago in reply to Arthur R☑️

Hi Arthur,

Thank you for reply.

I found TI programmer XDS110 or programmer board LP-XDS110ET. Does its also can be suitable? I am planning to use the lines TCK and TMS.

Thanks,

Alex

+1 Arthur R☑️ over 2 years ago in reply to Alex Katsovich

Hi Alex,

Indeed, the XDS110 series are suitable as well. It is actually the one we offer the most support for.

Regards,

Arthur

Sub-1 GHz forum