• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 190 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CC1312R: UART1 pin muxing configuration

CC1312R: UART1 IOC configuration through DriverLib

ppielorz
Prodigy 190 points
Part Number: CC1312R


Hi,

My question is directly related to https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/1058772/cc1312r-uart1-pin-muxing-configuration/3939364#3939364.

This issue is still not fixed (7.10.01.24). I'm writing a low level bootloader so I'm not able to use high-level UART2 driver here. What's more bizarre a very similar function regarding SSI configuration is allowing both SSI instances to configure...

Regards,

Paweł

  • 0
    TI__Guru* 82811 points

    Hi Paweł,

    I would recommend you to take a look at our UART2 driver and see how we handle this there. In general we always recommend to use our drivers. 

    If you give a specification of your issue we can try to take a look, but we cannot commit that we will support you through this implementation.

    Cheers,

    Marie H