CC1310: CC1310

I am afraid that since we do not have any kits with this package, we do not have example code for this.

Did you follow the steps in the post you were linking to? it seems like that worked for the cc2650 5x5 package.

You should also take a look at this:

Developing a Bluetooth Low Energy Application — Bluetooth Low Energy Software Developer's Guide 1.01.00 documentation

Siri

Hi Siri, I cannot seem to find the example (CC2650 5x5) that is mentioned in the previous post. I am also just using the ADC for a single read.

So on the Launch this works:

{
.adcDIO = CC1310_LAUNCHXL_DIO23_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO7,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},

The prototype has a RHB Device using DIO_8 so I modified the LaunchXL file to:

{
.adcDIO = CC1310_LAUNCHXL_DIO8_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO6,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},

and added  "#define CC1310_LAUNCHXL_DIO8_ANALOG    IOID_8"  to the .h file

There is no full example in the post, but an explanation as to how it was done on the CC26xx 5x5 to get it to work.

As I said before, I do not have any Hw I can test on, but can you please send me your Board.h file + CC1310_LANCHXL.c/h so that I can see if they look OK?

Hi Siri, I found the issue, sorry to take up your time. I had the pin configured as an output before calling the ADC.