CC1312PSIP: CC1312PSIP

Tal Olami

Prodigy 40 points

Part Number: CC1312PSIP
Other Parts Discussed in Thread: CC1312R

I am going to use the Serial Bootloader with my board with CC1312PSIP

What are the dedicated DIO pins used for the UART and what are the instructions

(Is there updated SWRA466D document that include the CC1312PSIP instructions?)

For example :

6 months ago

0 Sid 6 months ago

TI__Mastermind 20402 points

Hi Tal,

We do not have an updated SWRA466D. Please reuse the binary example and the settings for CC1312R.

Regards,

Sid

0 Tal Olami 6 months ago in reply to Sid

Prodigy 40 points

I am sorry but CC1312R Uart pins use DIO_3 and in CC1312PSIP DIO_3 is dedicated to control the RF switch so it can not be used as serial boot Uart

0 Tal Olami 6 months ago in reply to Tal Olami

Prodigy 40 points

I managed to program the CC1312PSIP using DIO_12 and DIO_13. but the bootloader backdoor pin (DIO_11) does not seems to have any affect .

0 Sid 6 months ago in reply to Tal Olami

TI__Mastermind 20402 points

Hi Tal, did you use one of the binaries provided in the SWRA466D Serial bootloader application package? Or are you trying to make an image of your own from the SDK?

Sub-1 GHz

Sub-1 GHz forum

CC1312PSIP: CC1312PSIP