• State
  • Locked Locked
  • Replies 52 replies
  • Subscribers 55 subscribers
  • Views 2249 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-EM-CC1314R10: How to implement RF multiple transmitter and single receiver (LP-EM-CC134R10)

Mani vel
Prodigy 85 points
Part Number: LP-EM-CC1314R10
Other Parts Discussed in Thread: SYSCONFIG, CC1314R10, CC1354P10, LP-XDS110ET

Tool/software:

Hi, I'm trying to work with LP-EM-CC1314R10 multiple RF transmitters and a single receiver. Is there any possible way to receive from multiple transmitters without payload loss at the RF receiver end and how to implement configurations for both transmitter and receiver to achieve the scenario? 

  • 0 in reply to Muniyappan R M
    TI__Expert 7645 points

    Hi Muniyappan,

    that looks good so far.

    We definitely see that there is an issue in how the broadcast messages are sent or how they are received.

    I guess the problem is that the sensors are not ready to receive a broadcast message when the collector sends it.

    Can you explain me in detail which code changes you have made to the default example?

    Kind regards,
    Theo

  • 0 in reply to Muniyappan R M
    TI__Expert 7645 points

    Hi Muniyappan,

    I apologize for the delayed response.

    Did you made progress with the testing and could resolve the issue of the missed broadcasting packets or is the issue still persisting?

    Kind regards,
    Theo