This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
I would like to know if it is possible to enable internal pull-up resistors when using the I2C bus in order to eliminate the external ones.
I couldn't find an option in syscfg file.
Regards.
Hi Nicolás,
this is not possible.
Please see the internal logic explained in section 2.2 in https://www.ti.com/lit/an/sbaa565/sbaa565.pdf?ts=1729511939294&ref_url=https%253A%252F%252Fwww.google.com%252F
You can only use sysconfig to decide if the pins are High or Low when they are not in use.
Kind regards,
Theo